Sinbosen subwoofer amplifier 4400w FP14000 2 channels speaker amplifier D4-2000 4670w 4 channels digital amplifier
FP14000 FP power amplifier
| FP Series | FP7000 | FP9000 | FP14000 | FP6000Q | FP10000Q |
| 8ΩStereo Power(RMS) | 1500WX2 | 1800WX2 | 2400WX2 | 700WX4 | 1350WX4 |
| 4ΩStereo Power(RMS) | 2800WX2 | 3000WX2 | 4400WX2 | 1300WX4 | 2700WX4 |
| 2ΩStereo Power(RMS) | 3500WX2 | 4500WX2 | 7000WX2 | 1500WX4 | 2500WX4 |
| 8ΩBridged Power(RMS) | 5600W | 6000W | 8800W | 2500WX2 | 4200WX2 |
| 4ΩBridged Power(RMS) | 7000W | 9000W | 14000W | 3000WX2 | 5000WX2 |
| Frequency Response(+o/-0.3dB,1W/8Ω) | 20 Hz - 34 kHz | ||||
| THD 20 Hz - 20 kHz for 1 W | <0.1% | ||||
| Signal-to-Noise Ratio | >112 dBA | ||||
| Channel separation (Crosstalk) at 1 kHz | >70 dB | ||||
| Input Connectors (per channel) | 3-pin XLR, electronically balanced | ||||
| Output Connectors (per channel) | Binding Posts 2-pole | ||||
| Class | TD | ||||
| TourClass Protection | ACL,IGM, AutoRamp, short circuit, DC voltage, turn-on/off transient, current inrush, sub/ultrasonic input | ||||
| Operating voltage, 230 V / 115 V nominal | 130-265 V / 65-135 V selectable | ||||
| Voltage Gain(dB) | 23, 26, 29, 32, 35, 38, 41, 44 dB selectable | ||||
| Input impedance | 20 kOhm | ||||
| Level adjustment (per ch.) | Front-panel potentiometer, 31 position detented from -inf to 0 dB | ||||
| Dimensions (W×H×D) | 483×88×396mm | ||||
| Packing dimension | 580×180×560mm | ||||
Feature:
Use Original Siemens high-quality capacitor 3300uf 200V.
Original ONSEMI transistor .
Neutrik XLR*/Speakon connectors
2 Channel Class TD Switching power amplifier
2 x 4,400 Watts into 4 Ohms, 2 X 2,400 Watts into 8 Ohms.
Extended heatsink to 69 mm.
High-quality Fan from TAIWAN.
Create SUPER BASS sound,suit for 2 units 18 inch subwoofer.
Separately controllable on Gain.
Scalable Voltage Peak Limiter (VPL).
Bridge-mode operation for touring applications.
Comprehensive protection scheme.
Applicable for big show,concert,dancing party,wedding and more enterainment or business performance.
Product Detail
D4-2000 1U digital amplifier
| 1U Amplifier | D4-2000 | |
Rated Output Power(THD+N=1%, 1kHz continue sine wave, all channel driving) | 8Ω/Stereo | 4x2000W |
4Ω/Stereo | 4x3400W | |
2Ω/Stereo | 4x4760W | |
16Ω/Bridge | 2x4000W | |
8Ω/Bridge | 2x6800W | |
4Ω/Bridge | 2x9520W | |
Bridge RMS voltage(THD+N=1%, 1kHz) | 126.5V | |
Slew rate(1kHZ, low-pass filter bypassed) | 50V/us | |
Sensitivity(Rated Power,1kHz) | selectable 41dB | selectable |
THD+N(10%Rated Power,typical) | 0.01% | |
| IMD-SMPTE(10%Rated Power,typical) | 0.01% | |
| DIM30(10%Rated Power,typical) | 0.01% | |
| Cross-talk(20Hz-1kHz,below Rated Power) | ≥90dB | |
| Frequency response(10% Rated Power,20Hz-20kHz,8Ω | ±0.2dB | |
| Input impedance | 20kΩ (Balance),10kΩ(Unbalance) | |
| Damp factor(8Ω,20Hz-200Hz | ≥5000 | |
SNR(A weighted 20Hz-22kHz) | ≥112dB | |
Main power | 90~260VAC,50~60Hz | |
| Protection | Under voltage, DC, Over temperature,Over load limiter,Short protection | |
Size(WxHxD) | 483x44x465mm | |
| Net weight | 12kg | |
PROFESSIONAL POWER AMPLIFIER
1 Performance overview
a,High efficiency and energy saving, operation cost is low,
b,Compact and light weight,structure is firm.
c,Comply with the safety and EMC standards.
d,90~260VAC / 50~60HZ Wide range power supply.
e,First-class quality, thanks for the components from international high-end manufacturers.
f,Temperature control fan for quiet operation.
g,Modular design and maintenance is convenient.
h,Very suitable for mobile show.
i, Reasonable design makes you feel relaxed in the process of using.
2 Environmental protection, energy saving, cost saving
Advantages of high efficiency:
* Low working temperature, rlability will be improved obviously.
* The size and weight are only 1/3 of tradition amplifier.
" The cost for transportation, handling, installation will reduce obviously.
* Saving energy, reducing operating costs
* Environmental protection
3. Cooling instructions: Good heat dissipation /High quality fans
The cooling mode of the equipment is as follows: the cold air is sucked through the ventilation hole of the front panel, and the heat is taken out from the rear panel.
4. Can be used for dual 8/10/12 inch line array speakers. Suitable for large parties, stage performances, schools, churches, conferences, concerts, etc.
Why choose us?
1.Three years warranty .If there are quality problems,provide pictures or video, engineers judge the problem and provide after-sale support Products with CE ROHS certification.2.We are 10 years manufature about professional audio speaker and power amplifier,4 years gold supplier on Alibaba.
3.Our engineers have 10 years work experience, very professional.
4.The product is light and suitable for performance and conferences.
5.There is no minimum order quantity limit ,you can choose to order 1pc or 1000000pcs.No limit about quality.
6.Products with CE ROHS certification.
FAQ
1.What's your MOQ (Minimum order quantity)?
A:There is no MOQ limited, you can choose to order 1pc or 1000000pcs, the more the better!
2.Except product value and shipping cost, do I need to pay any other fees in China?
A:No other fees needed in China!
3.How can I make the payment, what's your payment terms?
A:You can pay by TT, Western Union, or Paypa, credit card.
4.How long will it takes for production after payment? ( By express, door to door delivery, such as DHL/TNT/FedEx/UPS...)
A:If your order qty less than 5000pcs, it will takes about 7 working days; If more than 5000pcs, please confirm with me directly!
5.How long is your guarantee period of products?
A:3 years, if any problems during this period, we will sent you replacements to repair, anyway we will find the best solution for you!
6.Can you use our company logo and package?
A:Yes, we are manufacturer, we accept OEM request!